NTM Prop Drive Series 28-26A 1200kv / 286w (short shaft version)

NTM Prop Drive Series 28-26A 1200kv / 286w (short shaft version)

Click Here !!

If you are seeking Top Rated RC Helicopters then today you are in the appropriate site.
NTM Prop Drive Series 28-26A 1200kv / 286w (short shaft version) is one of the Top Rated RC Helicopters in the market. This Best goods delivers to you to suit your demand.
Here, we present to you one of Top Rated RC Helicopters.

NTM Prop Drive Series 28-26A 1200kv / 286w (short shaft version)

• Here is a rough guide to choosing the electric power train needed for various model types, bear in mind that over-powering is fine but the penalty is additional weight, and a good model is one that is balanced in terms of power, flying weight and build quality. Customer service is our top priority, and while some issues are beyond our control, we do our best to ensure your transaction exceeds your expectations.Should you have an issue, please contact us via messages and we are always there.
• MOTOR POWER CHOICE(AUW, or Flying Weight of model choice): 1) Vintage types many non-aerobatic indoor flyers -?50w~70w per 1lb 2)Trainers, gliders and high wing scale -?70w~100w per 1lb 3)Sport flyer with general aerobatic performance -?100w per 1lb 4)Warbirds -?120w~150w per 1lb 5)Multi engined models -?100w per 1lb (thrust from Multiple props gives in effect, more than 100w per 1lb performance) 6)EDF Jets -?150w~200w per 1lb 7)3D, F3A and high performance Models -? 150w~200w per 3202lb
• LIPOLY VOLTAGE CHOICE: Generally, to keep Lipo's in good order, try and keep max amps to around 50~60% of the capacity/C rating of the Lipoly Pack. 1)Up to 50w:?1s~2s 2)up to 100w:?2s~3s? 3)100w Up to 500w: 3s 4)500w up to 800w:?4s (This is the 0.40~0.46 glow equivalent range favoured by many club flyers) 5)800w up to 1000w:?5s 6)900w up to 1500w:?6s (this is the 0.60~0.90 ic equivalent range) 7)8s~3211s packs are for very large and generally specialised models.
• MOTOR CHOICE - KV or RPM per volt : If you are used to IC, the simple analogy is to treat low kv motors as 4 stroke engine equivalents and mid-high kv motors as 2 stroke engine equivalents, if you are not used to IC then we can give you some examples. Example 1:?Trainer/Sport Model, 1lb AUW, we want 100w motor (3s 20c Lipoly) mid kv for general flying, probably around 1200kv~1400kv, so around 8" prop Example 2:?Warbird/scale Model, 1lb AUW 3321w motor, kv choice,?
• ESC CHOICE: Look at the MAX AM PS figure given by the motor manufacturer in the data section and generally add 25% headroom, so, if a motor is rated to 15A, then choose at least an 18A ESC, better still a 20A and so on. If you are using a 4s Lipo, that the ESC is rated for 4s voltage. Also look at BEC rating, if the servo count is over 3205, then consider purchasing an ESC with a high AMP rated SBEC, or a seperate UBEC, OPTO type ESC's (they have no BEC, keeping the ESC seperate from RX suply)

This is a short shaft version of our popular NTM 28-26A 1200kv brushless outrunner motor. It is built with no external shaft allowing you to easily mountthis motor to your multi-rotor frame without the need for any modification.NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from design right through to shipping the product to you. The removal of middle-men has meant we can drive better value to the market and retail these motors at factory(our) prices! All performance figures are real and tested on our own motor dynos.Our QC engineers check and balance each moto r before shipping to the HobbyKing.com warehouse. Specs:Model: NTM Prop Drive Series 28-26A 1200kv (short shaft version)Kv: 1200rpm/vMax current: 17AMax Power: 215W @ 12v (3S) / 286W @ 15v (4S)Shaft: 3mmWeight: 57.6gESC: 20ACell count: 3s~4s LipolyBolt holes: 16mm 19mmBolt thread: M3Connection: 3.5mm Bullet-connectorProp Tests:7x6E - 11.1v - 90W - 8A 7x6E - 14.8v - 192W - 13A 8x4E - 11.1v - 100W - 9A8x4E - 14.8v - 222W - 15A8x6E - 11.1v - 145w - 13ANote: An accessory pack is available for this motor. Please see the related items below.

Check Price & More Information >>>

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on this site at the time of purchase will apply to the purchase of this product.